• Made from Polyethylene (Ld-PE) (03)
  • Colour: grey
  • Simple but effective insert foot for furniture and other constructions
  • Prevents sliding and absorbs vibrations
Dimensions
A 4.7
B 10
C 12
D 7
E
F F1
Basic info
Material Polyethylene (Ld-PE)
Color gray
Colour: Colour number:
grey002 XXX XXXX XXXXX
Colour definition : squirrel grey
Matches: Reasonably matches RAL colour 7000.
Featured colours reserved. Due to the screen differences in colour may occur.
Material:Material number:
Polyethylene (Ld-Pe)03 XXX XXXX XXXXX
Product information
Low density polyethylene is resistant to many chemicals. Therefore especially suitable for coverplugs and caps. Because of great flexibility it is almost unbreakable. Does not take in moisture and therefore very suitable for electrical insulation. Polyethylene can not be glued, burns after lighting it and may discolour and becomes brittle after exposure to direct sunlight.

Physical information
PropertyValueDIN
Relative density (gr/cm³)0.92--
Tensile strength (MN/m²)1053455
Elongation at break (%)30053455
Tensile modulus (MN/m²)18053457
Notched impact strength (kJ/m²)--53453
Ball indentation (MN/m²)1453456
Application temperature (max ºC)70--
Volume resistivity (Ohm.cm)10^1753482
Dissapation factor tan. (10³ Hz)0.000353483
Dielectric strength (MV/m)6053481
Coefficient of friction (on steel) (--)0.17-1.5--
Chemical resistance
Resistant to 
PetrolA
BenzeneA
Mineral oilsA
Vegetable oilsA
Weak alkalisA
Strong alkalisA
Weak acidsA
Strong acidsB

  A = Good
  B = Doubtful
  C = Poor

All information is given in good faith but without warranty

Insert foot [068] (068010000203)

  • Product Code: 068010000203

  • 0.2217€

  • 500 or more 0.2217€
  • 1000 or more 0.1712€

This product has a minimum quantity of 500